0.032" Aluminum Kynar T-Style Locking Drip Edge with Kick

0.032" Aluminum Kynar T-Style Locking Drip Edge with Kick

Product SKU :

$ 31.95 40.95 USD $ 31.95

$ 31.95

Size
Color
Roof Pitch / Angle
Hem
Product custom made to order
- I understand this product is custom made to order and cannot be returned. All dimensions are approximate. Custom profiles may be rejected due to limitations in bending.

This combination does not exist.

ADD TO CART BUY NOW

Product custom made to order: I understand this product is custom made to order and cannot be returned. All dimensions are approximate. Custom profiles may be rejected due to limitations in bending.

Terms and Conditions
30-day money-back guarantee
Lead Time: 5.0 Days

T Shape Roof Locking Drip Edge Flashing Metal - 10' Length

Edge metal used on rubber, tile, slate, shingle and metal roofs. 0.032" Kynar® Aluminum. Available in several colors.

This simple drip edge profile, also known as "t-style" is used on any type roofing, but is a requirement for metal roofs due to its overhang which is used to secure metal roof panels.
This style of drip edge is a preferred choice for many roofers because the overhang helps with directing water away from the vertical portion of the drip edge, minimizing the risk of the water going back against the fascia.
The name drip edge comes from the kick portion of this profile, at the very bottom, responsible for kicking the water away from the fascia board. That portion is essentially a drip edge.
Another common name for this drip edge profile is "metal roofing drip edge".
This may be ordered as an angled drip edge or flat. A flat drip edge will also work on an angled roof, except "B" will not sit up against the fascia, it will be perpendicular to the roof. Although this may not be ideal, if this is being placed on both a rake edge along with a gable it will make both pieces line up as far as height goes. Otherwise, if the rake edge metal is manufactured at an angle, it will need to have a taller "B" dimension to line up with the gable drip edge.
You may order custom profiles through this page, browse our store for other profiles or send us an email for a quote on something even more intricate.

Specifications

Material: 0.032" Kynar® Aluminum
10' Lengths
Made to Order
Made in the USA

(H) Nominal Size	Material	(A) Roof	(B) Face	(C) Kick	(D) Hem	(E) Overhang	(F)	Stock (Total Material)
1.5"	Copper, Freedom Gray, Lead Coated Copper	2.125"	1"	0.5"	0.375"	1"	3.125"	6"
1.5"	Aluminum, Steel, Galvalume and Stainless Steel	2.125"	1"	0.5"	0.375"	1"	3.825"	6"
2"	Copper, Freedom Gray, Lead Coated Copper	2.625"	1.5"	0.5"	0.375"	1"	3.125"	7.2"
2"	Aluminum, Steel, Galvalume and Stainless Steel	2.625"	1.5"	0.5"	0.375"	1"	4.625"	8"

All dimensions are approximate with ~1/8" tolerance.

Ordering Instructions

1 - Pick your material. For other materials navigate back to Edge Metal.
2.0 - Pick your dimensions. These are provided in the chart below.
2.1 - Custom dimensions: Pick the appropriate selection for the amount of stock material needed.
Example: If adding all dimensions of your custom profile (B+C+D+E+F) equals 6.5", you'll pick the next dimension up, in this case 7.2" or 8" depending on the material.
3 - Hem. The hem is the folded portion after the kick. If you select "No hem", the material that is used for this portion would be added to the roof portion.
Example: A 1.5" profile in copper has a 0.375" hem, which would be added to the roof dimension (F). (F) would become 3.5" (3.125" +0.375").
4 - Roof pitch. Select 0 for no pitch / 90° standard angle / flat roof, or the appropriate / closest pitch. The roof pitch is determined by the rise over the run.
Example: If for every horizontal 12" your roof rises 6", you have a pitch 6.
5 - This is where you'll enter dimensions for fields B, C, D, E and F if a custom profile was selected on field 2, otherwise leave blank.
6 - If you prefer to email a sketch you can use this field, otherwise, leave blank.

Submittals & Downloads

PDF - Locking drip edge roof metal

Color and Material Options

The most popular roof flashing metal colors in Galvalume Steel and Aluminum Kynar® are Bone White and Dark Bronze

Kynar® Aluminum & Galvalume Steel

Black

Matte Black
**24 Gauge Steel Only

Dark Bronze

Medium Bronze

Almond

Bone White

Copper Penny

Charcoal

Special Order Colors

Special Order colors require a minimum 2000 sqf. purchase for coil. Most colors have a 1 sheet minimum per order. Extra freight charges apply.

Patina Green

Teal

Hemlock Green

Forest Green

Hartford Green

Evergreen

Hunter Green

Arcadia Green

Military Blue

Berkshire Blue

Graphite

Interstate Blue

Slate Blue

Award Blue

Burnished Slate

Aged Bronze

Mansard Brown

Burgundy

Terra Cotta

Cardinal Red

Colonial Red

Midnight Bronze

Musket Gray

Sierra Tan

Sandstone

Slate Gray

Cityscape

Granite

Stone White

Anodic Clear

Silversmith

Silver

Champagne

Zinc

Weathered Zinc

Aged Copper

Weathered Steel

More Information

Kynar coated material is supplied by Petersen (Pac-Clad).
Colors are mostly available in 0.032″ and 0.040″ aluminum as well as 24 gauge galvalume (steel).
Some colors are available in 0.050″ and 0.063″ aluminum as well as 22 gauge galvalume.
Material available in sheet or coil format.
Pac Clad Sheets measure 48″ x 120″. No minimum purchase, but fees apply.
Standard coil widths are 20″ and 24″. Coils can be cut to any custom with from 48″ and under. Fees apply. 2000 sqf minimum purchase.
To learn more about Kynar® PVDF coated materials, please click here.